PLASTIC POLISHING & FINISHING

Not all plastic manufacturing is complete once the machining is done. Give your products that finishing touch that makes it complete

glY-l9W1-1024x684.png

CLEAR & FAST PLASTIC POLISHING

Plastic has significant advantages over other materials for optical finishing. Plastics weigh less, are durable and heat-resistant, and can take a polish just as brilliantly as traditional materials (e.g. glass) do.

33_small_print-e1536617404482-landscape-d6139de4e85b43fb8e8c3e9619b67a94-6pic5gtm9lju.jpg

EXPERT GUIDANCE & ATTENTION TO DETAIL

While no single plastic polishing technique fits every application, we know which polishing technique will work best for your part and meet necessary requirements.

photo-1516321318423-f06f85e504b3-1536x1024-landscape.jpg

OUR PLASTIC POLISHING METHODS

We know that polishing, especially on amorphous plastics, increases surface stress on plastic products.

Surface stress management is a critically important part of the plastic polishing process. Our polishing processes mitigate polishing-induced surface stress, providing high-quality plastic components that meet customer requirements. Plastic polishing methods used at Controlled Fluidics are:

BUFFING

As a traditional polishing method. buffing works on all types of plastics to smooth plastic products' surfaces. This method uses a cotton cloth to abrade the surface with thousands of multi-directional scratches that clear the first layer. Eventually, the product has a brilliant sheen. We recommend this approach for large flat pieces with limited holes and projections.

VAPOR POLISHING

This method uses vaporized solvents or chemicals with specialized equipment to smooth and create glossy surfaces. The operator exposes the plastic's surface to those agents that then work to soften its surface and create flow for irregularities to dissipate. We typically reserve this plastic polish method for clear thermoplastics only, such as polycarbonate, ULTEM®, polysulfone, and acrylic. Unlike other polishing methods, it can polish internal features, such as threads and bores as the operator can more tightly control the materials used. We do not recommend this method for semi-crystalline materials.

OPTICAL MACHINING & POLISHING

Optical machining encompasses 3 different polishing techniques that give optical-grade clarity to transparent/translucent materials: mechanical, chemical, and ultrasonic. Often these require special tooling and equipment for true optical results. As optical has strict QA standards, manufacturers measure finishes for form and roughness before shipping to ensure quality. This method produces the finest finish on most plastics (100 angstroms roughness is typical).

Best Practice

The best mix of functionality and price is to polish the large faces where components mount and leave the edges as machined. The clear faces provide good sealing for the valves and visualization of the channels. The edges are left translucent as they are typically a non-working surface.

HAVE QUESTIONS ABOUT PLASTICS POLISHING?

Our teams knows which plastics to use and their most effective forms of polishing. Get started with a no-obligation conversation.

hands-on-white-engineeringplans-scaled.jpg

 

REGARDING CLARITY GRADES

Manufacturing plastic parts from clear material is common for manifolds and machined components as it allows for easier internal process monitoring. Many amorphous materials in their raw state are clear, however, after machining they become translucent to opaque. This depends mostly on tool wear and cutting efficiency.

To return the machined part to clear, operators usually need a secondary polishing operation. Designers find that specifying the proper clarity to match the application can be a challenge.

Controlled Fluidics has defined The 4 Clarity Grades to aid this design effort.

GRADE 1

Standard machined plastic finish and appropriate for non-visual applications.

 

GRADE 2

Allows for activities like visual fluid flow and bubble detection. This is the most cost-efficient method with limited quantitative measurements for quality.

 

GRADE 3

This finish is appropriate for imaging through the manifold or plastic part for detection sensors. This clarity is specified in a localized area and typically not used for entire parts.

 

GRADE 4

This finish is a true optical finish specified in both surface finish and surface form. This level is appropriate for lenses but usually not used in manifold applications.

BEST PLASTIC MATERIALS FOR POLISHING

Our plastic polishing process can transform some common plastics materials into extremely optically clear building blocks for projects needing the utmost transparency. When selecting materials for projects that will require polishing, use the list below to narrow your options. Any of these materials will be excellent options for polishing projects.

Click on the titles to read more about each material.

ACRYLIC

Acrylic (aka, polymethyl methacrylate (PMMA)) is one of the most popular plastics for CNC machined parts, particularly in medical and diagnostic applications. 

micro-acrylic-manifold.jpg

POLYCARBONATE

Known for clarity and toughness, polycarbonate is an extremely popular material used in medical equipment and countless other applications. 

bonded-polycarbonate-manifold.png

ULTEM

ULTEM is ideal for diagnostics, medical devices, transportation, electronics, and other applications that need these properties. 

bonded-ultem-manifold.png

POLYSULFONE

Polysulfone is a stable plastic that resists creep, steam, and chemicals. It's a popular material for plastic parts in the aerospace, automotive, medical, and life sciences industries.

polysulfone-manifold-bonded.png

RADEL

Popular for medical devices, electronic assembles, and research components, Radel is impact-resistant, hydrolysis-resistant, thermal-resistant, and combustion-resistant. It can also handle unlimited steam sterilizations.

radel-milled-vapor-polish.png

POLYETHERSULFONE (PES)

Radel A/PES is an amorphous thermoplastic. It boasts a high resistance to heat, combustion, and chemicals. This lightweight, dimensionally stable material is popular for pumps, valves, medical devices, and other applications. 

pes-bonded-manifold.png

OTHER FINISHES

Polishing is not the only way that a manifold or component becomes complete. For other materials that cannot be polished, there are other methods to use.

beed-blasting-200x300.jpg

GLASS BEADS BLASTING

 

This finish produces a uniform smooth frosted finish. Colored parts especially black can look whiteish.

Acetal-delrin-300x300.jpg

TUMBLING/TUMBLED FINISH

 

This process produces a matte finish and useful for large, heavy-duty parts. For a length of time, a part is tumbled like an unfinished semi-precious gem. Material choice will affect the final product's look. 

AS MACHINED/"AS-IS"

 

No additional polishing. Clarity for a machine finish can vary from translucent to opaque depending on tool's cutting efficiency. The finished product's look will vary slightly depending on post-production operations.

QUICK NOTE ABOUT ALLOWABLE DEBRIS

Something we must mention about polished components is the potential cosmetic blemishes post production. This can cause some concerns about debris in the material and any loss of function when it comes to components, especially those made from acrylic.

According to the ASTM standard D4802-16, there is an allowable level of particulate debris in acrylic sheets. This standard states that any amount of particles under 0.8 mm (0.031 in) is acceptable provided they do not affect the service ability of the sheet. Particles between 3.2 mm (0.125 in) and 0.8 mm are allowed given no more than one particle of this size is found in 0.4 m2(4.3 ft2) of the sheet. We only purchase acrylic sheets that conform to this standard. We also hold our products to this standard, including parts in other clear materials.

While visible debris can seem inconvenient, it usually does not have an impact on functionality including those directly above a channel. For those applications requiring debris free material, please define the requirements during the quoting process. It is possible to cull material based on contamination levels with an additional cost.